Sea state estimation using multiple ships simultaneously as sailing wave buoys     

《Applied Ocean Research》2019

The article presents initial ideas towards a network-based approach for sea state estimation used for marine operations and other maritime applications. In principle, all available means, ranging from in situ buoys, fleet of ships to remote sensing by satellite and aircraft, could be considered, emphasising that each means and any combinations among may act simultaneously. This study focuses on just one of the means; the use of ships as sailing wave buoys. The article introduces the wave buoy analogy, i.e. ship-as-a-wave-buoy, and it makes a proposal on how to impose (different) weights to the single ship-specific wave spectrum estimates obtained from multiple ships. Moreover, the work includes a discussion about the importance to associate a measure to reflect the (un)certainty of the wave spectrum estimate. The article presents a numerical case study, where multiple ships act simultaneously as wave spectrum-estimators. The case study relies on numerical motion simulations, as appropriate full-scale data is not yet available. In the analysis, it is shown that the use of simultaneous data from multiple ships leads to more accurate wave spectrum estimations.  相似文献   

基于VG模型确定土水特征曲线基本参数     

潘登丽  倪万魁  苑康泽  张镇飞  王熙俊 《工程地质学报》2020,28(1):69-76

土水特征曲线基本参数(进气值、残余吸力值和反弯点的斜率等)在非饱和土的强度理论、渗流理论以及体变特性等方面都是非常重要的参数,常常通过传统画图法来确定,其精确度难以保证。以洛川标准剖面4层原状黄土为研究对象,基于VG模型提出单峰和双峰SWCC基本参数的确定方法;采用滤纸法测得SWCC数据点,基于VG模型进行最优化拟合,获取拟合参数,利用单峰和双峰SWCC数据点验证该方法的可行性;进行自然状态下的水分蒸发试验,根据质量含水率与蒸发时间的关系确定蒸发残余饱和度Srzf,依据Sr1、Sr2(Sr1和Sr2分别由确定残余状态的两种方法得到)与Srzf的相对误差值,比较了两种确定残余状态的方法。结果表明:对于单峰和双峰SWCC曲线,该方法都可以得到合理的基本参数并有效地确定其残余状态。  相似文献   

A bounding surface model for anisotropically overconsolidated clay incorporating thermodynamics admissible rotational hardening rule     

Yanni Chen  Zhongxuan Yang 《国际地质力学数值与分析法杂志》2020,44(5):668-690

A bounding surface model is formulated to simulate the behavior of clays that are subject to an anisotropic consolidation stress history. Conventional rotational hardening is revisited from the perspective of thermodynamics. As the free energy cannot be accumulated infinitely upon critical state failure, the deviatoric back stress must vanish. This requires the rotated yield surface to be turned back to eventually align on the hydrostatic axis in the stress plane. Noting that most of the previous propositions violate this restriction, an innovative rotational hardening rule is formulated that is thermodynamically admissible. The bounding surface framework that employs the modified yield surface is applied to simulate elastoplastic deformations for overconsolidated clays, with which the overprediction of strength on the “dry” side can be greatly improved with reasonable results. Other important features, including contractive or dilative response and hardening or softening behavior, can also be well-captured. It has been shown that the model can simulate three types of reconstituted clays that are sheared with initial conditions over a wide range of anisotropic consolidation stress ratios and overconsolidation ratios under both triaxial undrained and drained conditions. Limitations and potential improvement of the model regarding the fabric anisotropy at critical state have been discussed.  相似文献   

Generalized plasticity state parameter‐based model for saturated and unsaturated soils. Part 1: Saturated state     

Diego Manzanal  José Antonio Fernández Merodo  Manuel Pastor 《国际地质力学数值与分析法杂志》2011,35(12):1347-1362

The behavior of granular materials is known to depend on its loose or dense nature, which in turns depends both on density and confining pressure. Many models developed in the past require the use of different sets of constitutive parameters for the same material under different confining pressures. The purpose of this paper is to extend a basic generalized plasticity model for sands proposed by Pastor, Zienkiewicz and Chan by modifying the main ingredients of the model flow—rule, loading–unloading discriminating direction and plastic modulus—to include a dependency on the state parameter. The proposed model is tested against the available experimental data on three different sands, using for each of them a single set of material parameters, finding a reasonably good agreement between experiments and predictions. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Generalized plasticity state parameter‐based model for saturated and unsaturated soils. Part II: Unsaturated soil modeling     

Diego Manzanal  Manuel Pastor  José Antonio Fernández Merodo 《国际地质力学数值与分析法杂志》2011,35(18):1899-1917

The aim of this paper is to extend the generalized plasticity state parameter‐based model presented in part 1 to reproduce the hydro‐mechanical behavior of unsaturated soils. The proposed model is based on two pairs of stress–strain variables and a suitable hardening law taking into account the bonding—debonding effect of suction and degree of saturation. A generalized state parameter for unsaturated state is proposed to reproduce soil behavior using a single set of material parameters. Generalized plasticity gives a suitable framework to reproduce not only monotonic stress path but also cyclic behavior. The hydraulic hysteresis during a drying—wetting cycle and the void ratio effect on the hydraulic behavior is introduced. Comparison between model simulations and a series of experimental data available, both cohesive and granular, are given to illustrate the accuracy of the enhanced generalized plasticity equation. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Enhanced identification of a hydrologic model using streamflow and satellite water storage data: A multicriteria sensitivity analysis and optimization approach   总被引：1，自引：0，他引：1       下载免费PDF全文

Fuad Yassin  Saman Razavi  Howard Wheater  Gonzalo Sapriza‐Azuri  Bruce Davison  Alain Pietroniro 《水文研究》2017,31(19):3320-3333

Hydrologic model development and calibration have continued in most cases to focus only on accurately reproducing streamflows. However, complex models, for example, the so‐called physically based models, possess large degrees of freedom that, if not constrained properly, may lead to poor model performance when used for prediction. We argue that constraining a model to represent streamflow, which is an integrated resultant of many factors across the watershed, is necessary but by no means sufficient to develop a high‐fidelity model. To address this problem, we develop a framework to utilize the Gravity Recovery and Climate Experiment's (GRACE) total water storage anomaly data as a supplement to streamflows for model calibration, in a multiobjective setting. The VARS method (Variogram Analysis of Response Surfaces) for global sensitivity analysis is used to understand the model behaviour with respect to streamflow and GRACE data, and the BORG multiobjective optimization method is applied for model calibration. Two subbasins of the Saskatchewan River Basin in Western Canada are used as a case study. Results show that the developed framework is superior to the conventional approach of calibration only to streamflows, even when multiple streamflow‐based error functions are simultaneously minimized. It is shown that a range of (possibly false) system trajectories in state variable space can lead to similar (acceptable) model responses. This observation has significant implications for land‐surface and hydrologic model development and, if not addressed properly, may undermine the credibility of the model in prediction. The framework effectively constrains the model behaviour (by constraining posterior parameter space) and results in more credible representation of hydrology across the watershed.  相似文献   

Limitations of suction‐controlled triaxial tests in the characterization of unsaturated soils          下载免费PDF全文

X. Zhang 《国际地质力学数值与分析法杂志》2016,40(2):269-296

Behavior of unsaturated soils is influenced by many factors, and the influences of these factors are usually coupled together. Suction‐controlled triaxial (SCTX) tests are considered to allow researchers to investigate influences of individual variables on unsaturated soils under specified stress path with controls of stresses, pore water, and air pressures. In the past 50 years, SCTX testing method has been established as a standard approach to characterize constitutive behavior of unsaturated soils. Most important concepts for modern unsaturated soil mechanics were developed upon results from the SCTX tests. Among these, one of the most important contributions in the constitutive modeling of elasto‐plastic behavior for unsaturated soils is the Barcelona basic model (BBM) proposed by Alonso et al. in 1990. The BBM successfully explained many features of unsaturated soils and received extensive acceptance. However, the SCTX tests are designed based upon the divide‐and‐conquer approach in which an implicit assumption is used: soil behavior is stress‐path independent. However, it is well‐established that unsaturated soil behavior is elasto‐plastic and stress‐path dependent. It is found that the SCTX tests in fact cannot control the stress path of an unsaturated soil during loading. This incapability, in combination with complicated loading/collapse behavior of unsaturated soils, makes the SCTX tests for characterizing unsaturated soil questionable. This paper discusses the limitations of the SCTX tests in the characterization of unsaturated soils. A possible solution to the problem was proposed based on a newly developed modified state surface approach. The discussions are limited for isotropic conditions. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Selection of sand models and identification of parameters using an enhanced genetic algorithm          下载免费PDF全文

Yin‐Fu Jin  Zhen‐Yu Yin  Shui‐Long Shen  Pierre‐Yves Hicher 《国际地质力学数值与分析法杂志》2016,40(8):1219-1240

Numerous constitutive models of granular soils have been developed during the last few decades. As a consequence, how to select an appropriate model with the necessary features based on conventional tests and with an easy way of identifying parameters for geotechnical applications has become a major issue. This paper aims to discuss the selection of sand models and parameters identification by using genetic algorithm. A real‐coded genetic algorithm is enhanced for the optimization with high efficiency. Models with gradually varying features (elastic‐perfectly plastic modelling, nonlinear stress–strain hardening, critical state concept and two‐surface concept) are selected from numerous sand models as examples for optimization. Conventional triaxial tests on Hostun sand are selected as the objectives in the optimization. Four key points are then discussed in turn: (i) which features are necessary to be accounted for in constitutive modelling of sand; (ii) which type of tests (drained and/or undrained) should be selected for an optimal identification of parameters; (iii) what is the minimum number of tests that should be selected for parameter identification; and (iv) what is the suitable and least strain level of objective tests to obtain reliable and reasonable parameters. Finally, a useful guide, based on all comparisons, is provided at the end of the discussion. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

The Petrology and Mineralogy Analysis of Noble Metal Alloys in the Inclusions of a Chondrite: An Implication on the Evolution of the Solar Nebula     

WU Yun-hua  XING Wei-fan  XU WEi-biao 《Chinese Astronomy and Astrophysics》2014

The calcium-aluminium-rich inclusions (CAIs) in chondrites are believed to be the most early solids formed in the solar system, and retain the original information of the early solar nebula. However, in-depth researches revealed that most inclusions had experienced a complex history of evolution, including partial melting and secondary alteration. Focused on the refractory and chemically stable noble metal particles in the CAI of a CV meteorite (NWA 2140), a study of astrochemistry is made in this paper. The petrology and mineralogy analysis as well as the composition determination have been made on the noble metal particles. Based on the result of composition analysis, the thermodynamic process experienced by the CAI is inferred, and two kinds of noble metal alloys are identified, which correspond to the early-stage condensation products and the secondary alteration products of primordial metals, respectively.  相似文献   

The importance of iron speciation (Fe+2/Fe+3) in determining mineral assemblages: an example from the high‐grade aluminous metapelites of southeastern Madagascar     

S. D. BOGER  R. W. WHITE  B. SCHULTE 《Journal of Metamorphic Geology》2012,30(9):997-1018

Metapelitic granulites from the Anosyen domain of southeastern Madagascar are exposed in three intercalated formations: the Amparihy, Bakika and Ihosy formations. Although mineralogically distinct from each other, the rocks from these formations show very similar bulk‐rock compositions when measured on a Fe_T basis. The preserved mineral assemblages thus do not reflect differences in the ratios of the main rock‐forming oxides (i.e. Al₂O₃:Fe_T:MgO), but instead reflect variations in the pre‐metamorphic oxidation state of the protolith rocks. These differences in oxidation state are manifested via differences in iron speciation – either Fe⁺² or Fe⁺³. The relatively reduced rocks of the Amparihy Formation preserve the assemblage bi–sp–sill–g–cd, which contrasts markedly with the mostly garnet and spinel‐absent bi–cd–sill–mt assemblages preserved in the strongly oxidized rocks of the Ihosy Formation. Compositionally intermediate rocks of the Bakika Formation are garnet bearing, but sillimanite‐absent, and contain the assemblage sp–g–cd–mag. Modelling of these rocks in the Na₂O–CaO–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–O system suggests that they evolved along a heating and cooling P–T path with only limited decompression accompanying cooling on the retrograde path. Peak temperatures and pressures of ～880–920 °C and 6–6.5 kbar are inferred for the majority of the Anosyen domain, with slightly lower peak temperatures (～840 °C) estimated in the extreme northwest of the area. The high‐temperature and relatively low‐pressure nature of metamorphism suggests high geothermal gradients existed during orogenesis, which in southern Madagascar is related to the amalgamation of Gondwana (580–520 Ma). Although metamorphic temperatures may have been augmented via thermal advection from the emplacement of the syn‐ to post‐tectonic Ambalavao suite, the high geothermal gradients nevertheless suggest thin and consequently hot lithosphere existed prior to orogenesis.  相似文献